SENSARMOUR
Many thefts do not occur through the tank opening, but through the level sensor cavity. These guards close that access point. Choose the size based on the distance between the tank clamps.
Installation
It is mounted using the tank's own clamps.
No additional tools or machining required. Choose the size based on the outer distance between clamps: L for 700-1080 mm, S for 510-710 mm, and XS for 410-510 mm.
Empty tank
ATTENTION: SENSARMOUR must be installed with an empty tank. Secure the tank using temporary means before beginning.
Clamps one by one
Loosen the tank retaining clamps ONE BY ONE, never both at the same time, and slide the armature into place.
Press and go
Retighten the clamps. The reinforcement is held in place by them: no special tools, drilling, or welding are required.
Why SENSARMOUR
Many burglaries don't happen through the front door, but through the sensor.
SENSARMOUR closes off access through the fuel level sensor opening on commercial vehicle tanks. It is the route almost no one protects, and the one that remains open once the filler neck has already been armored.
Seamless protection
Once installed, fuel can no longer be accessed through the sensor opening or the supply and return lines.
Quick setup
It assembles in minutes, with no mechanical modifications: no screws, rivets, adhesives, or sealants.
Ready to use
It arrives assembled and ready. 3 mm aluminum, or 2 mm hot-dip galvanized steel in the SENSARMOUR-IN version.